Windows Could Not Start Windows無法啟動

Windows is annoying, that’s taken as read, but some of us cannot afford to Windows是煩人的，這是作為閱讀，但我們有些人不能 switch to a Mac切換到Mac and replace all our proprietary software, while Linux is yet to go mainstream.並更換所有的專有軟件，而Linux是還沒有成為主流。 Maybe one day.也許有一天。 In the meantime we Win users have to occasionally contend with errors like this:與此同時，我們贏得用戶的偶爾抗衡的錯誤這樣的：

Windows could not start because of a computer disk hardware configuration problem. Windows無法啟動，因為計算機磁盤硬件配置問題。
Could not read from the selected boot disk. 無法讀取選定的啟動磁盤。 Check boot path and disk hardware. 請檢查開機路徑和磁盤硬件。
Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information. 請檢查Windows文檔有關硬件磁盤配置和您的硬件參考手冊以獲得更多信息。

Told you it was annoying.告訴你這是煩人。 So, what are you supposed to do if you see an error like this.那麼，什麼是你該做的，如果你看到這樣的錯誤。 Well, you could try restarting, but that’s unlikely to work, particularly if it really is a hardware failure.那麼，您可以嘗試重新啟動，但這是不可能的工作，尤其是如果真的是硬件故障。 Hardware failures happen, but are not very common, much more likely is a configuration problem.硬件故障發生，但不是很常見，更可能是一個配置問題。 According to據 Microsoft微軟 , this particularly error can occur because of any of the following: ，這尤其可能發生的錯誤，因為任何如下：

The Default value in the [Boot Loader] section of the Boot.ini file is missing or invalid. 默認值[ Boot Loader ]區段的Boot.ini文件丟失或無效。
Windows XP is not installed in the location specified in the Boot.ini file. Windows XP是不是安裝在指定的位置在Boot.ini文件中。
The Ntoskrnl.exe file is missing or damaged. Ntoskrnl.exe文件丟失或損壞。
The partition path in the Boot.ini file is not set correctly. 分區路徑在Boot.ini文件中沒有設置正確。
General hardware failure. 一般硬件故障。

Having had a laptop die on me sometime ago and having seen similar errors repeatedly until I figured out the problem, I can vouch for the fact that there can be a dozen other reasons.審議了筆記本電腦芯片的某個時候對我以前看過類似的錯誤反复，直到我想出這個問題，我可以保證的事實，就不可能有十幾個其他原因。 For instance, if you a Compaq or HP machine and have tried to restore from the restore disks you’re likely to see this error because the restore will not have installed舉例來說，如果你一個康柏或HP機器並試圖恢復從磁盤恢復您可能看到這個錯誤，因為將不會恢復已安裝 SATA的SATA drivers for your hard disk.司機為您的硬盤。 But, without a floppy drive you cannot install them at restore.但是，沒有軟盤驅動器無法安裝它們恢復。

The fix lies in disabling SATA in the BIOS before your system even gets to try and boot Windows.該補丁程序是禁用的SATA在BIOS之前，您的系統甚至會嘗試啟動Windows 。 This will 99% of the time work, allowing you to get up and running albeit without SATA enabled.這將99 ％的兼職工作，您可以啟動和運行的SATA儘管沒有啟用。 If you really want to get SATA going, you’ll have to create a如果你真的想要的SATA去，你要創建一個 bootable USB or memory card開機USB或記憶卡 that can carry the SATA drivers.可攜帶的SATA驅動器。 Re-enable SATA in the BIOS and boot from the USB.重新啟用的SATA在BIOS和引導從USB 。 At the point when you get the chance to hit在這一點當你有機會擊中 F6按F6 to install the SATA drivers and hope for the best.安裝的SATA驅動程序，並希望最好的。 Just to confirm, my I did resurrect my laptop, but am yet to take the SATA plunge…只要確認，我復活我沒有我的筆記本電腦，但我尚未採取的SATA暴跌...