Αρχική σελίδα σύκων SIG Σύκα Newsfeed SIG Σύκα SIG με ηλεκτρονικό ταχυδρομείο Σύκα SIG οι περισσότερες δημοφιλείς θέσεις
Σημαντικοί αριθμοί
Βοήθεια σας, με τη βοήθεια με, το ξεφύλλισμα, και τις άκρες τεχνολογίας

Τώρα είναι πάντα ένας καλός χρόνος να αναβαθμιστεί Wordpress

8η Φεβρουαρίου 2008 · από το Δαβίδ Bradley

Λογότυπο WordpressΑναβάθμισα τελικά την περιοχή Sciencebase μου στην πιό πρόσφατη έκδοση Wordpress, ατονούσε στην έκδοση 2.1.3 για μακριά πάρα πολύ από καιρό και έχουν υπάρξει πολλές βελτιώσεις ασφάλειας μεταξύ εκείνης της έκδοσης κληρονομιών και της τρέχουσας έκδοσης 2.3.3. Ήταν μια θέση από το Wayne Liew έξυπνα ονομασμένη Wayne Liew Dot Com αυτός με έπεισε για να κάνει τα απαραίτητα.

Το Liew επισημαίνει ότι η αναβάθμιση στην πιό πρόσφατη έκδοση Wordpress μπορεί να βοηθήσει να προστατεύσει την περιοχή σας από τις δευτερεύουσες ρωγμές ασφάλειας. Για παράδειγμα, πρόσφατα 2.3.2 έως τη βελτίωση 2.3.3 απαιτούνται απλά επειδή παρακάμπτει ένα πρόβλημα ασφάλειας από το οποίο οι εγγραμμένοι χρήστες μπορούν θέσεις να εκδώσουν άλλων χρηστών», το οποίο δεν είναι προφανώς ένα καλό πράγμα. Ακόμη και ότι η ενιαία βελτίωση αρχείων αξίζει εάν αποτρέπει κάποιο την περιοχή σας.

Το Liew συστήνει έντονα τη Wordpress αυτόματη βελτίωση Plugin (WPAU) αλλά πρέπει να πω ότι ήταν με το τρόμο ότι ερεύνησα πόσο εύκολη μια βελτίωση από μια τέτοια παλαιά έκδοση είτε θα γινόταν με το χέρι είτε θα αυτοματοποιούταν.

Είχα αναβαθμίσει με το χέρι από μια έκδοση 1.5 περίπου και την είχα βρεί για να είμαι μάλλον επίπονη από άποψη υποστηρίζοντας τα αρχεία, διαγράφοντας τα παλαιούς αρχεία και τους φακέλλους, θυσμένος που για να μην διαγράψω, επαναρυθμίζοντας τις άδειες αρχείων κ.λπ. κ.λπ., έτσι ήμουν πολύ μπονταυ στον πειρασμό για να χρησιμοποιήσω WPAU.

Το plugin υποστηρίζει τα αρχεία σας και η βάση δεδομένων, απενεργοποιεί plugins, μεταφορτώνει τα αρχεία βελτίωσης Wordpress, τα εγκαθιστά, επανενεργοποιεί μόνο εκείνα τα plugins που απενεργοποιήθηκαν, καθαρίζει επάνω τα προσωρινά αρχεία και σας δείχνει την τελική σύνδεση «βελτίωσης βάσεων δεδομένων» σε Wordpress που ξαναφεύγει την περιοχή σας.

Αυτόματη βελτίωση Wordpress

Εδώ είναι μια γρήγορη άκρη για εκείνους που θέλουν να αναβαθμίσει - δοκιμάστε WPAU σε μια μικρότερη, λιγότερο σημαντική περιοχή πρώτα. Εάν αυτό όλες οι εργασίες τέλεια έπειτα αυτό θα σας δώσουν την εμπιστοσύνη για να αναλάβουν μια αυτοματοποιημένη βελτίωση στην κύρια περιοχή σας.

Η άκρη προφανώς μόνο ισχύει εάν έχετε περισσότερες από μια περιοχές, και εάν ένας από τους είναι λιγότερο σημαντικός σε σας από άλλη. Η επιτυχής βελτίωσή μου της μικρότερης περιοχής (αν και πηδώντας μόνο από 2.3.2 έως 2.3.3) με έπεισε και έτσι ανέλαβα μια βελτίωση Sciencebase WPAU.

Φυσικά, εάν είστε σε έναν οικοδεσπότη με το σύστημα Fantastico έχετε αυτοματοποιήσει τις βελτιώσεις Wordpress που ενσωματώνονται. Το μόνο πρόβλημα είναι ότι Fantastico καθυστερεί συνήθως πίσω από την τρέχουσα απελευθέρωση (κατά την διάρκεια του γραψίματος, κάθεται 2.3.2, στην πραγματικότητα)

Sciencebase screenshot

Εν πάση περιπτώσει, WPAU ελειτούργησε τέλεια, πρώτος χρόνος, ο οποίος ήταν μια καταπληκτική ανακούφιση. However, having been using a 2.1.5 widgetized system the final result was a messed up sidebar that took a few little tweaks to fix (some widgets were missing and others were in the incorrect order, although that may have been down to caching problems rather than the upgrade itself).

However, one or two plugins simply failed to run in the latest version (Top Posts by Category and Get Recent Comments, for instance). I removed these altogether pending the release of compatible updates. Other than that I’ve had no problems. Several other plugins were flagged as requiring upgrades, and these were duly done. If you happen to visit Sciencebase.com and spot any problems I’ve not seen, perhaps you could let me know.

Next week: How to Steal a Wordpress Theme. Subscribe to the Sig Figs feed to be alerted.

13 responses so far ↓

  • Animati // Feb 11, 2008 at 3:40 am

    Thank you for well-timed prompt! I’ll update my wordpress-based photoblog today.

    Animati’s last blog post..Bee Gee’s Yawn

  • David Bradley // Feb 12, 2008 at 2:00 pm

    Although Sig Figs was at version 2.3.2 of Wordpress and it would have been simpler just to download the single file update required to take it to 2.3.3, I thought I’d better stand by my assertions in this post and use WPAU. It worked (eventually). I had to do several page refreshes during the automated update. And, although everything was fine in the end, I can see that some users might panic and think they’ve trashed their site when they see blank screens. Don’t panic. Just do a full refresh of the page at whatever stage it stalls at, and repeat until you get the link to move on to the next step.

    db

  • Deborah // Feb 14, 2008 at 12:50 am

    David,

    I was glad to hear your good news about upgrading WordPress with this plugin. Like you, I was very concerned about upgrading. I used the plugin, and it worked, but I could not download the backup files.

    While I’m glad the upgrade worked (at least I think it worked! I’m still checking the pages), I was very disappointed that it did not allow me to download the backup files.

    Each time I tried to download, all I got was a page not found error. I checked the files online to see if they were on my site, but couldn’t find the backup files. All I found in the wpau-backup folder were an empty index.php and an empty index.html file, with no content.

  • David Bradley // Feb 14, 2008 at 8:08 am

    Deborah, if it worked, then it doesn’t matter about the backup files (this time). Next time do a manual backup before you run the plugin, just in case the same thing happens again. Your blog is definitely showing the latest version, right?

    db

  • David Bradley // Feb 14, 2008 at 9:17 am

    Wordpress version 2.5 is on its way. In fact, you can trial it now http://wp.chrisjohnston.org/?p=3

    db

  • Deborah // Feb 14, 2008 at 12:35 pm

    Hi David,

    Being the cautious person I am, I did do a backup before I ran the plugin. I was glad it worked! But a bit concerned that the plugin’s backup didn’t work.

    Yes, the site I used this on has been updated correctly and is showing the most recent version.

  • David Bradley // Feb 14, 2008 at 1:52 pm

    Deborah, it worked fine on the various blogs I ran it on. I guess we’ll never know why you couldn’t get the backups within the plugin itself…

    …as with all plugins there could be a conflict with another plugin. Maybe the way to do it next time would be to deactivate all plugins manually except WPUA, and then reactivate once everything is complete. I realize that’s starting to negate some of the benefits of WPUA, but it would still make the upgrade process simpler than a total manual upgrade.

    db

  • Deborah // Feb 15, 2008 at 2:29 am

    Brian,

    Good suggestion. I’ll turn off the plugins the next time, before I use the upgrade plugin. Hopefully I’ll remember to come back and report if it worked any better!

  • David Bradley // Feb 15, 2008 at 7:30 am

    Deborah…who’s Brian?

    Yes, please do, this is likely to be an ongoing thread especially as Wordpress 2.5 is on its way next month.

    db

  • Deborah // Mar 29, 2008 at 1:10 am

    Hi David,

    Not sure where I found the name David. My apologies!

    I read a review of WordPress 2.5 earlier today. If this gets through (I wasn’t sure if you accepted urls in your comments) - here’s the site:

    http://tinyurl.com/2s8g6j

  • David Bradley // Apr 1, 2008 at 3:06 pm

    Well as most Wordpress bloggers will know by now, the program has reached version 2.5 and it’s soooo much slicker and better than the previous versions, so now really is the time to upgrade. Double check your backups, make sure you know which plugins will fail and take the plunge!

    db

  • Gaida // Apr 10, 2008 at 3:01 am

    Hi David,
    Thanks for your detailed post on the importance of upgrading wordpress.

    I must admit I was lagging with my upgrades & was very wary about doing it. Thankfully all went well. Haven’t taken the jump to 2.5 as yet.

    I’d also heard about deactivating your plugins before upgrading even with the WPAU. I have noticed that a link has appeared informing me there is an upgrade.

    Gaida’s last blog post..Understanding Motivation

  • David Bradley // Apr 10, 2008 at 7:42 am

    Deactivating plugins is an essential, but with WPAU it reactivates only those that were active before the upgrade so any disabled plugins that happen to be in your folder don’t get inadvertently started. Jump to 2.5, security and features make it a must. 2.6 is on its way soon, though…

    db

Leave a Comment

Comments are checked for spam before appearing, no need to post it twice.

Related Posts